200V: Communication processors
Communications processors are used to connect different target and source systems, e.g. via Ethernet to higher-level ERP systems or serially to scanners, printers and other peripherals.
CP 240 - serial
The communication processors CP 240 serial enable the serial process coupling to different target and source systems. Depending on the module they have a RS232 and/or a RS485 interface.
CP 240 - EnOcean
The CP 240 EnOcean enables process coupling on the basis of the EnOcean wireless communication. EnOcean is a battery-free radio system that, due to the short signal duration of 0.5 ms and 10 mW transmitting power, has an energy requirement of only 50 μWs. Here, the system uses the energy from the smallest changes in pressure or temperature to power the sensors.
CP 240 - M-Bus
In the case of the CP 240 M-Bus, the process coupling takes place on the basis of the M-Bus communication. The M-Bus System (Metering Bus) is a European-standardized 2-wire fieldbus for acquiring consumption data. Here, the data is transmitted serially via a reverse polarity protected 2-wire line from slave systems (meters) to a master system.
Support for all standard protocols (ASCII, STX/ETX, 3964(R), RK512 and Modbus (master, slave)
Internal communication via VIPA FCs
LED status indicator
Electrically isolated to the backplane bus
Assembly with 35 mm profile rail
24 month warranty